OM8450 - Theory of Organizational Improvement

12 critical success factors for Six Sigma effectiveness. (2002). Measuring Business Excellence, 6(3), 68-69.
Ahmed, A. M., Yang, J. B., & Dale, B. G. (2003). Self-assessment methodology: The route to business excellence. The Quality Management Journal, 10(1), 43-57.
Al-Mashari, M., & Zairi, M. (1999). Managing strategic business performance improvement: An integrative progressive approach. Knowledge and Process Management, 6(4), 227-237.
Albers, W., & Kallenberg, W. C. M. (2004). Are estimated control charts in control? Statistics, 38(1), 67-79.
Alemi, F. (2004). Tukey’s control chart. Quality Management in Health Care, 13(4), 216-221.
Amaratunga, D., Sarshar, M., & Baldry, D. (2002). Process improvement in facilities management: The SPICE approach. Business Process Management Journal, 8(4), 318-337.
Amelsberg, J. (2002). Systemic performance and cost management: A management framework for organizational excellence. Quality Congress. ASQ’s Annual Quality Congress Proceedings, 487-500.
Barkley, B., & Saylor, J. H. (2001). Customer-driven project management: Building quality into project process (2nd ed.). New York: McGraw-Hill.
Bashein, B. J., & Markus, M. L. (1994). Preconditions for BPR success. Information Systems Management, 11(2), 7-13.
Bateman, N., & David, A. (2002). Process improvement programmes: A model for assessing sustainability. International Journal of Operations & Production Management, 22(5/6), 515-526.
Bell, E., Taylor, S., & Thorpe, R. (2002). A step in the right direction? Investors in People and the learning organization. British Journal of Management, 13(2), 161-171.
Benda, J. (2004). Transforming the help desk. Certification Magazine, 6(8), 52-55.
Berlin, C. (2004). Change management. Total Quality Management & Business Excellence, 15(5/6), 569-592.
Berry, L. L., & Parasuraman, A. (1997). Listening to the customer – The concept of a service-quality information system. Sloan Management Review, 38(3), 65-76.
Besterfield, D. H. (1990). Quality control (3rd ed.). Englewood Cliffs, NJ: Prentice Hall.
Bhatt, G. D. (2001). Business process improvement through electronic data interchange (EDI) systems: An empirical study. Supply Chain Management, 6(2), 60-74.
Biolos, J. (2002). Six Sigma meets the service economy. Harvard Management Update, 7(12), 3-5.
Bossink, B. A. G., & Blauw, J.-N. (2002). Strategic ambitions as drivers of improvement at DaimlerChrysler. Measuring Business Excellence, 6(4), 5-11.
Boyle, E. (2004). 6 Sigma success. Paper, Film & Foil Converter, 78(1), NW2-NW3.
BPR at Honeywell. (2002). Strategic Direction, 18(6), 14-17.
Brandt, D. S. (2002). Automating your IT help desk. Computers in Libraries, 22(3), 52-55.
Brynjolfsson, E. (1993). The productivity paradox of information technology. Association for Computing Machinery. Communications of the ACM, 36(12), 67-77.
Bullington, S., Easley, J., Greenwood, A., & Bullington, K. (2002). Success factors in initiating versus maintaining a quality improvement process. Engineering Management Journal, 14(3), 8-14.
Callahan, C. D., & Barisa, M. T. (2005). Statistical process control and rehabilitation outcome: The single-subject design reconsidered. Rehabilitation Psychology, 50(1), 24-33.
Cannell, P. (2001). Investors in People: what is it all about? British Dental Journal, 191(4), 175-178.
Carayannis, E. G., Alexander, J., & Geraghty, J. (2001). Service sector productivity: B2B electronic commerce as a strategic driver. Journal of Technology Transfer, 26(4), 337-350.
Carnell, M., & Lambert, J. (2000). Organizational excellence through Six Sigma discipline. Quality Focus, 4(2), 18-25.
Carpinetti, L. C. R., & Melo, A. M. d. (2002). What to benchmark? Benchmarking, 9(3), 244-255.
Cayer, C. (2001). Choosing appropriate business improvement tools. Quality Congress. ASQ’s Annual Quality Congress Proceedings, 282-285.
Champy, J. (1995). Reengineering management: The mandate for new leadership. New York: HarperBusiness.
Continuous improvement: The ten essential criteria. (2002). Measuring Business Excellence, 6(1), 49-51.
Cooper, R. (1998). The promise – and peril – of integrated cost systems. Harvard Business Review, 76(4), 109-119.
Cooper, R., & Kaplan, R. S. (1988). Measure costs right: Make the right decision. Harvard Business Review, 66(5), 96-103.
Cooper, R., & Kaplan, R. S. (1992). Activity-based systems: Measuring the costs of resource usage. Accounting Horizons, 6(3), 1-13.
Dale, B. G. (2003). Managing quality (4th ed.). Malden, MA: Blackwell Pub.
Dalgleish, S. (2003a). My ideal quality system. Quality, 42(7), 14.
Dalgleish, S. (2003b). Quality theory critical to business decisions. Quality, 42(9), 24.
Davenport, T. H., & Short, J. E. (1990). The new industrial engineering: Information technology and business process redesign. Sloan Management Review, 31(4), 11-27.
De Cock, C., & Hipkin, I. (1997). TQM and BPR: Beyond the beyond myth. Journal of Management Studies, 34(5), 659-675.
DeLone, W. H., & McLean, E. R. (1992). Information systems success: The quest for the dependent variable. Information Systems Research, 3(1), 60-95.
DeLone, W. H., & McLean, E. R. (2003). The DeLone and McLean model of information systems success: A ten-year update. Journal of Management Information Systems, 19(4), 9-30.
DeLone, W. H., & McLean, E. R. (2004). Measuring e-commerce success: Applying the DeLone & McLean information systems success model. International Journal of Electronic Commerce, 9(1), 31-47.
Deming, W. E. (1986). Out of the crisis. Cambridge, MA: Massachusetts Institute of Technology, Center for Advanced Engineering Study.
Dervitsiotis, K. N. (2000). Benchmarking and business paradigm shifts. Total Quality Management, 11(4-6), S641-S646.
Dey, P. K. (2001). Re-engineering materials management: A case study on an Indian refinery. Business Process Management Journal, 7(5), 394-408.
Dobson, M. S. (2001). Project management for the technical professional. Newtown Square, PA: Project Management Institute.
Dubie, D. (2003). Help desks look to reinvent their mission. Network World, 20(44), 8.
Eccles, R. G. (1991). The performance measurement manifesto. Harvard Business Review, 69(1), 131-137.
Eckes, G. (2003). Making Six Sigma last (and work). Ivey Business Journal, 68(2), 1-5.
Evaluating improvement programs. (2002). Strategic Direction, 18(3), 10-12.
Evans, J. R., & Jack, E. P. (2003). Validating key results linkages in the Baldrige Performance Excellence Model. The Quality Management Journal, 10(2), 7-24.
Feigenbaum, A. V. (1999). The new quality for the twenty-first century. The TQM Magazine, 11(6), 376.
Feurer, R., Chaharbaghi, K., Weber, M., & Wargin, J. (2000). Aligning strategies, processes, and IT: A case study. Information Systems Management, 17(1), 23-34.
Field hardware vendor re-vamps Sears help desk. (2001). Frontline Solutions, 2(11), 55.
Forcadell, F. J., & Guadamillas, F. (2002). A case study on the implementation of a knowledge management strategy oriented to innovation. Knowledge and Process Management, 9(3), 162-171.
Freeman, R. E. (1994). The politics of stakeholder theory: Some future directions. Business Ethics Quarterly, 4(4), 409-421.
Fundin, A. P., & Bergman, B. L. S. (2003). Exploring the customer feedback process. Measuring Business Excellence, 7(2), 55-65.
Garvin, D. A. (1988). Managing quality: The strategic and competitive edge. New York: Free Press.
Giufurta, C. J., & Dunham, K. (2003). Six Sigma approach adds discipline to Excalibur program work practices. Program Manager, 32(4), 40-42.
Goldenson, D. R., & Gibson, D. L. (2003). Demonstrating the impact and benefits of CMMI: An update and preliminary results: Software Engineering Institute.
Grupe, F. H. (1997). Outsourcing the help desk function. Information Systems Management, 14(2), 15-22.
Hammer, M., & Champy, J. (1993). Reengineering the corporation: A manifesto for business revolution. New York, NY: HarperBusiness.
Hayes, R. H., & Clark, K. B. (1985). Explaining observed productivity differentials between plants: Implications for operations research. Interfaces, 15(6), 3-14.
Hill, F. M., & Collins, L. K. (1999). Total quality management and business process re-engineering: A study of incremental and radical approaches to change management at BTNI. Total Quality Management, 10(1), 37-45.
Hoque, K. (2003). All in All, it’s just another plaque on the wall: The incidence and impact of the Investors in People standard. Journal of Management Studies, 40(2), 543-571.
Hotard, D. G. (1988). Quality and productivity: An examination of some relationships. Engineering Management International, 4(4), 259-266.
Hunter, D. (2001). How to hire great people at web speed. Fast Company(42), 124-125.
Hyrkäs, K., & Lehti, K. (2003). Continuous quality improvement through team supervision supported by continuous self-monitoring of work and systematic patient feedback. Journal of Nursing Management, 11(3), 177-188.
Ittner, C. D. (1994). An examination of the indirect productivity gains from quality improvement. Production and Operations Management, 3(3), 153-170.
Jalote, P., & Saxena, A. (2002). Optimum control limits for employing statistical process control in software process. IEEE Transactions on Software Engineering, 28(12), 1126-1134.
Jarrar, Y. F., & Zairi, M. (2000). Best practice transfer for future competitiveness: A study of best practices. Total Quality Management, 11(4/5/6), S734-S740.
Jensen, J. B., & Markland, R. E. (1996). Improving the application of quality conformance tools in service firms. Journal of Services Marketing, 10(1), 35-55.
Jones, O. (1997). Changing the balance? Taylorism, TQM and work organisation. New Technology, Work & Employment, 12(1), 13-24.
Jones, T. M. (1995). Instrumental stakeholder theory: A synthesis of ethics and economics. Academy of Management Review, 20(2), 404-441.
Juran, J. M., & Gryna, F. M. (1993). Quality planning and analysis: From product development through use (3rd ed.). New York: McGraw-Hill.
Kaplan, R. S., & Norton, D. P. (1992). The balanced scorecard: Measures that drive performance. Harvard Business Review, 70(1), 71-79.
Kaplan, R. S., & Norton, D. P. (1996). The balanced scorecard: Translating strategy into action. Boston, MA: Harvard Business School Press.
Kartha, C. P. (2002). Application of Taguchi Methods for process improvement for tubular exhaust manifolds. Journal of American Academy of Business, Cambridge, 2(1), 118-122.
Kaye, M., & Anderson, R. (1999). Continuous improvement: The ten essential criteria. The International Journal of Quality & Reliability Management, 16(5), 485-506.
Kitchenham, B. A. (1996). Software metrics: Measurement for software process improvement. Cambridge, MA: Blackwell.
Krafcik, J. F. (1988). Triumph of the lean production system. Sloan Management Review, 30(1), 41-52.
Kristensen, K., & Kanji, G. K. (1992). On measurement of customer satisfaction. Total Quality Management, 3(2), 123-128.
Kueng, P. (2000). Process performance measurement system: A tool to support process-based organizations. Total Quality Management, 11(1), 67-85.
Kueng, P. (2002). Performance measurement systems in the service sector: The potential of IT is not yet utilised. International Journal of Business Performance Management, 4(1), 95.
Kulpa, M. K., & Johnson, K. A. (2003). Interpreting the CMMI: A process improvement approach. Boca Raton, FL: Auerbach.
Kurien, P., Rahman, W., & Purushottam, V. S. (2004). The case for re-examining IT effectiveness. The Journal of Business Strategy, 25(2), 29-36.
Kutschker, M. (1994). Re-engineering of business processes in multinational corporations. Carnegie Bosch Institute International Research Conference, Retrieved from
Lee, C., Dolezalek, H., & Johnson, G. (2005). 2005 Top 100. Training, 42(3), 20-62.
Levi, A. S., & Mainstone, L. E. (1987). Obstacles to understanding and using statistical process control as a productivity improvement approach. Journal of Organizational Behavior Management, 9(1), 23-32.
Levine, P. (1997). Help desks get strategic role. CommunicationsWeek(645), 62.
Lianjie, S., Fugee, T., & Kapur, K. C. (2004). Design of multiple cause-selecting charts for multistage processes with model uncertainty. Quality Engineering, 16(3), 437-450.
Linder, J. C., Cole, M. I., & Jacobson, A. L. (2002). Business transformation through outsourcing. Strategy & Leadership, 30(4), 23-28.
Livingstone, M., & Dibkey, B. (2002). Utilising performance measurement to drive operational excellence in a post-merger environment. Journal of Facilities Management, 1(2), 131-141.
Lovelace, H. W. (2004). Secret CIO: How to get superstars on your help desk. InformationWeek(1003), 64.
MacCarthy, B. L., & Wasusri, T. (2002). A review of non-standard applications of statistical process control (SPC) charts. The International Journal of Quality & Reliability Management, 19(2/3), 295-320.
Mainstone, L. E., & Levi, A. S. (1987). Fundamentals of statistical process control. Journal of Organizational Behavior Management, 9(1), 5-21.
Malhotra, Y. (1998). Business process redesign: An overview. IEEE Engineering Management Review, 26(3).
Maselli, J., & Colkin, E. (2002). Couriers deliver customer service. InformationWeek(891), 60.
Mason, B., & Antony, J. (2001). Statistical process control: An essential ingredient for improving service and manufacturing quality. Measuring Business Excellence, 5(4), 47-52.
Matthews, M. L. (2001). How to implement feedback & drive improvement. Quality Congress. ASQ’s. Annual Quality Congress Proceedings, 294-299.
Mayor, T. (2003). Targeting perfection; Six Sigma is a defect reduction methodology that forces organizations to focus on the quality of the customer experience. And it can most definitely be applied to IT. CIO, 17(5), 62-70.
McAdam, R., & Bailie, B. (2002). Business performance measures and alignment impact on strategy: The role of business improvement models. International Journal of Operations & Production Management, 22(9), 972-996.
McAfee, A. (2002). The impact of enterprise information technology adoption on operational performance: An empirical investigation. Production and Operations Management, 11(1), 33-53.
Meers, A., & Samson, D. (2003). Business excellence initiatives: Dependencies along the implementation path. Measuring Business Excellence, 7(2), 66-77.
Mersha, T. (1997). TQM implementation in LDCs: Driving and restraining forces. International Journal of Operations & Production Management, 17(1/2), 164-183.
Mitman, C. (2001). Get ISO certified on time and within budget. Quality, 40(11), 46-48.
Monheit, L. (2001). Integrating supply chain management through technology. National Products Industry Insider. Retrieved from
Morgan, J. (1993). A variation in understanding. The TQM Magazine, 5(1), 39-43.
Mundy, R. A., Passarella, R., & Morse, J. (1986). Applying SPC in service industries. Survey of Business, 21(3), 24-29.
Murray, J. P. (2004). Judging IT department performance. Information Systems Management, 21(2), 72-77.
Neuscheler-Fritsch, D., & Norris, R. (2001). Capturing financial benefits from Six Sigma. Quality Progress, 34(5), 39-44.
Owen, M. (1997). Merits of Investors in People debated. People Management, 3(4), 69.
Parasuraman, A., Zeithaml, V. A., & Berry, L. L. (1988a). SERVQUAL: A multiple-item scale for measuring consumer perceptions of service quality. Journal of Retailing, 64(1), 12-40.
Parasuraman, A., Zeithaml, V. A., & Berry, L. L. (1988b). SERVQUAL: A multiple-item scale for measuring consumer perceptions of service quality (Executive Summary). Journal of Retailing, 64(1), 5-6.
Patterson, J. W., & Engelkemeyer, S. (1989). A company cannot live by its quality alone. Quality Progress, 22(8), 25-27.
Pearson, T. A. (1999). Measurements and the knowledge revolution. Quality Progress, 32(9), 31-37.
Peryam, S. C. (1999). Sending quality to the front line. Quality Digest. Retrieved May 8, 2005 from
Pollalis, Y. A. (1996). A systemic approach to change management. Information Systems Management, 13(2), 19-25.
Proposing a framework for your TQM program. (2002). Measuring Business Excellence, 6(3), 58-61.
Pulat, B. M. (1994). Process improvements through benchmarking. The TQM Magazine, 6(2), 37-41.
Raising the standard: The contribution of the Investors in People Award to quality in the organisation. (2004). British Journal of Administrative Management, 10-12.
Rajaram, K., & Corbett, C. J. (2002). Achieving environmental and productivity improvements through model-based process redesign. Operations Research, 50(5), 751-763.
Reid, R. D., & Sanders, N. R. (2005). Operations management: An integrated approach (2nd ed.). Hoboken, N.J.: John Wiley.
Riggins, F. J., & Mukhopadhyay, T. (1994). Interdependent benefits from interorganizational systems: Opportunities for business partner reengineering. Journal of Management Information Systems, 11(2), 37-57.
Rodney, M., & Alan, B. (2001). Business performance measurement and change management within a TQM framework. International Journal of Operations & Production Management, 21(1/2), 88-108.
Rose, K. H. (1995). A performance measurement model. Quality Progress, 28(2), 63-66.
Schmenner, R. W. (2001). Looking ahead by looking back: Swift, even flow in the history of manufacturing. Production and Operations Management, 10(1), 87-96.
Schmenner, R. W. (2004). Service businesses and productivity. Decision Sciences, 35(3), 333-347.
Schmenner, R. W., & Cook, R. L. (1985). Explaining productivity differences in North Carolina factories. Journal of Operations Management, 5(3), 273-289.
Schmenner, R. W., & Swink, M. L. (1998). On theory in operations management. Journal of Operations Management, 17(1), 97-113.
Schneider, P. (2000). Good help is hard to find. CIO, 13(13), 122.
Seen, M., Beaumont, N., & Mingins, C. (2001). Benchmarking business processes in software production: A case study. Benchmarking, 8(4), 262-280.
Simpson, D. S., Roberts, T., Walker, C., Cooper, K. D., & O’Brien, F. (2005). Using statistical process control (SPC) chart techniques to support data quality and information proficiency: The underpinning structure of high-quality health care. Quality in Primary Care, 13(1), 37-43.
Solomon, H. (2000). Noranda’s help desk puts SLAs in question. Computing Canada, 26(3), 21.
Sosbe, T. (2003). Don Ronchi: Education launches success for Raytheon. Chief Learning Officer, 2(8), 28-30.
Stewart, J., & Kringas, P. (2003). Change management — Strategy and values in six agencies from the Australian Public Service. Public Administration Review, 63(6), 675-688.
Stoddard, D. B., & Jarvenpaa, S. L. (1995). Business process redesign: Tactics for managing radical change. Journal of Management Information Systems, 12(1), 81-107.
Sugumaran, V., & Arogyaswamy, B. (2003). Measuring IT performance: “Contingency” variables and value modes. The Journal of Computer Information Systems, 44(2), 79-86.
Sulek, J. M. (2004). Statistical quality control in services. International Journal of Services Technology & Management, 5(5/6), 1.
Sumukadas, N., Fairfield-Sonn, J. W., & Morgan, S. (2005). Demystifying statistical process control. Simulation & Gaming, 36(1), 134-145.
Sweat, J. (2001). Help desks think bigger. InformationWeek(859), 50-52.
Tallon, P. P., Kraemer, K. L., & Gurbaxani, V. (2000). Executives’ perceptions of the business value of information technology: A process-oriented approach. Journal of Management Information Systems, 16(4), 145-173.
Tonnessen, T. (2000). Process improvement and the human factor. Total Quality Management, 11(4/5/6), S773-S778.
Towill, D. R. (2001). The process of establishing a BPR paradigm. Business Process Management Journal, 7(1), 8-23.
Tran, M. N. (2003). Take benchmarking to the next level. Nursing Management, 34(1), 18-23.
Vakola, M., & Rezgui, Y. (2000). The role of evaluation in business process re-engineering: two case studies in the construction industry. Knowledge and Process Management, 7(4), 207-216.
Valentine, R., & Knights, D. (1998). TQM and BPR – Can you spot the difference? Personnel Review, 27(1/2), 78-85.
Venkatraman, N. (1997). Beyond outsourcing: Managing IT resources as a value center. Sloan Management Review, 38(3), 51.
Violino, B. (2004). Productivity gains: Quantity plus quality. Optimize(28), 73-75.
Vivant, B. (1999). Information technology metrics. The Journal of Bank Cost & Management Accounting, 12(3), 11-38.
Vizard, M. (2000). The maligned help desk: It’s time to re-evaluate the whole support process. InfoWorld, 22(28), 73.
Walton, M. (1986). The Deming management method (1st ed.). New York: Dodd, Mead.
Wheeler, D. J. (1993). Understanding variation: The key to managing chaos. Knoxville, TN: SPC Press.
Whiting, R. (1997). Panic at the help desk. Software Magazine, 17(11), 92-95.
Wong, H. B., Gan, F. F., & Chang, T. C. (2004). Designs of moving average control chart. Journal of Statistical Computation & Simulation, 74(1), 47-62.
Xerox aims to be model of self-improvement. (2002). Strategic Direction, 18(4), 8-10.